| Scale
Module |
| Minimum Net Load @ Rated Capacity: 15% of Load
Cell Capacity |
| Maximum Gross Load @ Rated Capacity: 80% of Load
Cell Capacity |
| Available Load Cell Sizes: 20kg, 50Kg, 100Kg, 200Kg,
250Kg, 500Kg. |
| Maximum Belt Width: 10-101R-1: 36” |
| Maximum Belt Width: 10-101R-2: 60” |
| |
| Loal
Cell |
| Load Cell: Welded bending beam type load cell |
| Load Cell Output: 2.0 Mv/V, ± .1 % |
| Excitation: 10 VDC or VAC |
| Load Cell Rating: 3000d, meets OIML R60 & NIST HB-44 |
| Temperature Range: Safe: -30 to +80 degrees C |
| Compensated: -10 to +40 degrees C |
| Overload: 150% of Rated Capacity |
| Input Impedance: 380 ohms ± 10 |
| Output Impedance: 350 ohms ± 3 |
| Environmental Protection: Hermetically Sealed, IP67 |
| Load Cell Construction: Stainless Steel |
| Cable: 6 Conductor, Shielded, 22 AWG |
| |
| Speed
Sensor Model 60-1 |
| Type: Digital, Brushless |
| Mounting: Direct to 5/8’ diameter stub shaft on tail pulley,
bend pulley, or lagged return roll |
| Housing: Weather-tight |
| |
| MINI 11-101 INTEGRATOR |
| Enclosure Field Mount |
| Dimensions: Height: 11.81 in (300 mm) |
| Width: 9.84 in (250 mm) |
| Depth: 6.30 in (160 mm) |
| Material: Polyester |
| Weight: 8.8 Ibs. (4 kg) |
| Protection: IP 65 (NEMA 4) |
| |
| Environmental |
| Operating Temperature: Field mount version 14° to 122°F
(-10° to +50°C) |
| Storage Temperature: -4° to 158°F (-20° to +70°C) |
| Humidity (operating & stocking): <90% (without
condensation) |
| |
| Power Requirements |
| Voltage: Standard - 110 or 220 VAC selectable, +10%-15% |
| Frequency: 50-60 Hz |
| Power: 15 VA |
| Protection: Fuse (internal) |
| |
| Digital Inputs: |
| Quantity: 3 |
| Type: Static, for dry contact or open collector |
| Insulation: Optical, 2500 Vrms (UL E67349) |
| Voltage: 14 VDC internal source |
| Current: 6 mA |
| |
| Digital Outputs: |
| Quantity: 4 |
| Type: Relay, Dry contact, N.O. |
| Insulation: Galvanic,10000 M-ohm |
| Voltage: max 240 VAC, 48 VDC |
| Current: max 0.5 A |
| |
| Analog Outputs: |
| Quantity: 1 |
| Type: Selectable: 0-20 mA, 4-20 mA, 20-0 mA, 20-4 mA |
| Max Load: 500 ohm |
| Resolution: 12 bit (4096 divisions) |
| Linearity: 0.1 % |
| Insulation: Galvanic, 1500 Vrms |
| Communication Ports |
| Quantity: 1 |
| Port #1: RS 232C (for printer use only) |
| |
